Need help?Do you have a question about the PRESIDENT jackson ii classic and is the answer not in the manual?
General| Type | CB Radio |
|---|---|
| Channels | 40 |
| Modulation | AM / FM |
| Antenna Impedance | 50 ohms |
| Supply voltage | 13.8 V DC |
| Frequency Range | 26.965 MHz - 27.405 MHz |
| Power Output | 4 W AM / 4 W FM |
| Microphone | Dynamic |
Crucial safety precautions before operating the transceiver to prevent damage and ensure proper function.
Highlights the transceiver's capability to operate under various international standards and regulations.
Guidance on selecting the best position for the CB radio and how to securely mount it in a vehicle.
Instructions on selecting the appropriate antenna and best practices for mobile and fixed installations.
Detailed steps for safely connecting the CB radio to the vehicle's 12V power supply, emphasizing correct polarity.
Essential operations before first use: connecting microphone, checking antenna, and setting initial volume and squelch.
Procedures for calibrating the SWR meter using both the integrated meter and an external device.
How to operate the ON/OFF switch, adjust volume, and control RF power output for clear communication.
Understanding the squelch function for noise suppression and the Automatic Squelch Control (ASC) feature.
How to set microphone sensitivity and reception gain for optimal transmission and reception quality.
Using the VOX feature for hands-free transmission and adjusting sensitivity, anti-vox, and delay time.
How to use the Clarifier for frequency fine-tuning during LSB/USB reception.
Selecting the correct modulation mode (AM, FM, USB, LSB) for communication.
Using the channel selector knob and UP/DN keys for changing channels.
Activating and deactivating audible key feedback and using the channel scan feature.
Explanation of the digital display and the ASC/VOX and RX/TX indicator lights.
Adjusting the brightness of the transceiver's lighting for comfortable viewing.
How to select the correct frequency band configuration for your country of use.
Using the priority channel switch to select channels 9 or 19.
How the Roger Beep function signals the end of a transmission.
Utilizing noise blanker, automatic noise limiter, and high-cut filters for cleaner reception.
Understanding the meter's functions for signal strength, SWR measurement, and calibration.
Details on the 6-pin microphone plug located on the front panel for easier dashboard installation.
How to use the PTT button for transmitting and the Time Out Timer to prevent continuous transmission.
Information on power supply, antenna connector, and jacks for external loudspeaker and VOX microphone.
Key general details including channels, modulation modes, frequency ranges, impedance, and dimensions.
Technical data related to frequency allowance, carrier power, transmission interference, audio response, and output power.
Specifications detailing maximum sensitivity for AM, FM, USB/LSB reception.
Steps to diagnose and resolve issues where the radio fails to transmit or has poor transmission quality.
Troubleshooting guidance for problems related to receiving signals or poor reception quality.
Steps to identify and fix issues where the CB radio fails to power on or light up.
Guidance on how to successfully transmit and receive messages after ensuring the radio is ready.
List of words used for spelling out letters during radio communications to ensure clarity.
Common expressions and slang used within the CB radio community for informal communication.
Definitions of technical terms and abbreviations related to CB radio operations and equipment.
Details specific conditions and circumstances under which the product warranty is not applicable.
Guidance on initial checks to perform when experiencing malfunctions before contacting support.
To Next Page