Need help?Do you have a question about the PRESIDENT JAMES and is the answer not in the manual?
General| Number of Channels | 40 |
|---|---|
| Operating Modes | AM / FM |
| Antenna Impedance | 50 ohms |
| Type | CB Radio |
| Frequency Range | 26.965 MHz to 27.405 MHz |
| RF Output Power | 4 W |
Guide for selecting the optimal position and mounting your mobile CB radio, considering visibility and cable management.
Instructions on choosing and installing the correct antenna for optimal performance, including mobile and fixed types.
Details on connecting the CB radio to a 12V power source, including polarity checks and vehicle specific considerations.
Steps to perform before first use, including microphone connection, antenna check, and basic settings like squelch and volume.
Procedure for adjusting the SWR meter to ensure optimal antenna performance and prevent equipment damage.
Instructions for calibrating and using an external SWR meter for antenna adjustment.
How to turn the CB radio on/off and adjust the display's luminosity using the DIMMER function.
Guide to using channel selector keys, adjusting volume, and setting the squelch for clear communication.
Instructions on switching between AM and FM modulation modes for transmission.
Explanation of how to adjust RF Power for optimal transmission, considering communication distance.
Details on adjusting RF Gain for reception sensitivity and Mic Gain for microphone input level.
How to activate and use the Roger Beep notification and Public Address (PA) system.
Instructions for using the Echo effect and accessing Channel 19 FM directly.
How to monitor two channels simultaneously using the Dual Watch feature.
Procedure for scanning through all memorized channels and stopping when a signal is detected.
Information on the personal 4-digit access code and when it must be re-entered.
Step-by-step guide for setting up and managing the personal 4-digit access code for security purposes.
Key general parameters including channels, modulation, impedance, power supply, dimensions, and weight.
Detailed specifications for transmission, including frequency allowance, carrier power, and audio response.
Detailed specifications for reception, including sensitivity, selectivity, and audio power.
Solutions for problems related to transmission power, antenna connection, SWR, and microphone issues.
Solutions for issues with reception, including PA activation, squelch level, and RF gain settings.
Guidance for resolving issues where the code display appears unexpectedly during transmission.
Steps to check power supply, wiring, correct code entry, and the power button if the radio fails to turn on.
A table listing the international frequencies for each CB radio channel.
Definitions of technical terms and common CB radio expressions used in the manual.
To Next Page
