Need help?Do you have a question about the PRESIDENT George II and is the answer not in the manual?
Crucial safety warning before operating the transceiver.
Highlights the transceiver's compliance with multiple standards.
Describes the process and location for mounting the CB radio.
Details on choosing and installing an antenna for optimal performance.
Instructions for connecting the radio to the vehicle's power supply.
Initial setup steps before operating the transceiver for the first time.
Procedure for adjusting the Standing Wave Ratio for optimal transmission.
Instructions for powering the unit on/off and adjusting volume levels.
Explanation of the Automatic Squelch Control and manual squelch adjustment.
Description of the Liquid Crystal Display (LCD) and its indicators.
How to select channels and adjust RF power output.
Covers changing modulation modes, Public Address, and memory functions.
Details on memory functions, CTCSS/DCS codes, and their activation/deactivation.
Explains scan, dual watch, skip functions, and memory M3.
Covers ANL/NB filters, HI-CUT filter, and memory M4.
How to use emergency channels, adjust RF gain, and MIC gain.
Functionality for monitoring channels and sending call melodies.
Details on VOX, Noise Gate, and VOX settings.
Explains the NRC filter and the REPEATER/RELAY function.
How to activate and deactivate the TALKBACK function.
Functions associated with the F key and the LOCK function.
How to use and configure the ECHO function.
Functionality of the CLARIFIER and information about the USB charging socket.
How to select the appropriate frequency band for the country of use.
Adjusting the volume level for the TALKBACK function.
How to change the display color of the unit.
Adjusting the brightness of the unit's display.
Modifying the RX TONE setting for reception.
Activating or deactivating the audible beep for key presses.
Functionality and settings for the Roger Beep feature.
Selecting which information is displayed on the unit.
Choosing the scanning mode (all channels or memorized channels).
Selecting the type of scan behavior (stopping on busy channels or returning after a delay).
Memorizing or erasing channels from the scan list.
Configuring the Public Address (PA) mode for external speakers.
Selecting the type of microphone connected to the unit.
Calibrating the SWR meter through audible beeps.
Setting the NRC filter independently for transmission and reception.
Configuring CTCSS/DCS codes and operating modes.
Setting up and selecting emergency channels.
Customizing the second channel for Dual Watch functionality.
Configuring the repeater/relay function to extend transmission range.
Adjusting frequency tuning increments for finer adjustments.
Setting the frequency for the call tone.
Controlling the volume of the unit and accessories.
Setting the SWR level protection to prevent damage.
Setting the maximum voltage limit for protection.
Overview of general, transmission, and reception technical specifications.
Steps for resolving transmission and reception issues.
Steps for resolving power-on and other operational faults.
Standard phonetic alphabet used in radio communications.
Common slang and terminology used by CB radio operators.
Definitions of technical terms related to CB radio operation.
List of conditions and damages not covered by the product warranty.
Initial troubleshooting steps for common malfunctions.
To Next Page
General