Need help?Do you have a question about the PRESIDENT Lincoln II and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Weight | 1.5 kg |
| Antenna Impedance | 50 Ohms |
| Modes | AM, FM, USB, LSB |
| Microphone | Electret |
Guidance on selecting a location and securely mounting the transceiver in a vehicle.
Instructions for installing the antenna, including choosing the right type and placement for optimal performance.
Detailed steps for safely connecting the transceiver to a 12V power source, including polarity checks.
Essential steps to perform before first use, such as connecting the microphone and checking settings.
How to use the integrated SWR meter to adjust the antenna for optimal standing wave ratio.
Instructions for powering the unit on/off and adjusting the audio volume level.
How to adjust the output power level for transmission in different modes.
Explanation of Automatic Squelch Control (ASC) and manual squelch adjustment for noise reduction.
Guide on accessing and using the transceiver's menu functions for customization.
How to save and recall favorite channels or settings using the MEM and STORE functions.
Details on using the rotary push knob for frequency tuning and setting parameters.
How to use the clarifier to improve voice clarity during reception.
Adjusting microphone gain for transmit audio and RF gain for receive sensitivity.
How to use the channel/frequency selector keys to navigate bands and channels.
Understanding the various indicators and information displayed on the LCD screen.
Using the INDIC key for voltage display and CALL for voice coding.
Enabling and configuring the ECHO effect for voice modulation.
Accessing emergency channels (9/19) and activating the key lock function for safety.
Using NB/ANL filters and HI-CUT for reducing interference and improving audio quality.
Enabling the ROGER BEEP for transmission confirmation and KEY BEEP for button presses.
Activating SCAN for busy channels and DUAL WATCH for monitoring two channels.
Selecting modulation modes (AM/FM/USB/LSB/CW) and using CTCSS/DCS tones.
Using VOX for hands-free transmission and configuring sensitivity, anti-vox, and delay.
Enabling split frequency transmission for repeaters and setting offset/direction.
Navigating bands and enabling the +10KHz frequency shift.
Information about the 6-pin microphone plug and its connection.
Setting the frequency and delay time for the Roger Beep function.
Configuring frequencies for CW transmission and call tones.
Adjusting the monitor gain level for the internal speaker.
Setting the maximum transmission time to prevent continuous keying.
Enabling and configuring SWR protection levels to prevent damage.
Enabling and setting high/low limits for voltage protection.
Setting the lower limit for voltage protection to safeguard the device.
Configuring scan behavior and adjusting backlight color and brightness.
Customizing key functions and setting up Dual Watch parameters.
Restoring factory settings for all functions or channels.
Overview of modulation modes, frequency range, power supply, and physical dimensions.
Details on frequency allowance, carrier power, and audio response.
Information on sensitivity, frequency response, and selectivity.
Solutions for issues like no transmission or poor transmission quality.
Troubleshooting steps for poor reception or no receive signal.
Diagnosing problems related to the transceiver not powering on or lighting up.
Standard phonetic alphabet used for clear communication.
To Next Page