EasyManuals Logo

PRESONUS PRM1 User Manual

PRESONUS PRM1
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Condenser Microphones
PRM1
RTAMeasurement
Microphone
Owner’s Manual
Introduction
Thank you for purchasing the PreSonus® PRM1
RTA Microphone. This omnidirectional microphone
has been designed to provide an accurate
reproductionofaroom’ssoundcharacteristicsfor
use with audio-analysis tools, such as real-time
analyzers and spectrographs. Delivering a flat
frequency response from 20 Hz to 20 kHz and
featuringa ¼”,pre-polarized,electretcondenser
capsule, the PRM1is an excellent companion
to the Virtual StudioLive Smaar System
CheckWizards and otheranalysis systems.
Weappreciatethesupportyouhaveshown
us through the purchase of this product.
Features
¼,pre-polarized,electretcondensercapsule
About This Microphone
The PRM1 is a condenser microphone with a
flat frequency response and an omnidirectional
polar pattern. Let’s briefly define these terms.
Condenser microphones such as the PRM1
requireapowersource,whichcanbeprovided
by an external power supply or using phantom
power, which is usually provided by a mixer,
preamplifier, or direct box. Phantompower is
sent over the same mic cable that carries the
audio signal; the term derives from the fact
that there is no visible power cable, and the
voltage is not perceptible in the audio path.
PreSonus StudioLive-series mixers provide
phantom power to every mic input,
Omnidirectional
The PRM1 has an omnidirectional polar
pattern,meaning it is equally sensitivein all
directions. This allows the microphone to
measure reflections, as well as direct signals,
providingan accurate depiction of the room.
Flatfrequencyresponsefrom20Hzto20 kHz
Low noise, low distortion
Ideally suited for system analysis
and measurement
All-metal chassis
Precautions
Mute audio system output prior to
connectingordisconnectingthePRM1or
engaging/disengagingphantompower.
When operating in outdoor
environments, cover capsule with foam
windscreen to reduce wind noise.
Attachtoa mic standwhen analyzingsound
systems to ensure accurate measurements.
including the talkback input utilized by the
Smaart System Check Wizards in VSL.
FlatFrequency Response
Amicrophonewitha flatfrequencyresponse
captures all frequencies equally within its
specifiedresponserange,neitherboosting
nor cutting frequencies, so it accurately
reproduces the incoming signal.Whilethis
makesit ideal for measuring what a room or
speaker is doing to the outgoing signal in a
soundsystem,it is not necessarilythebest
choice for recording specific instruments.
®
7257 Florida Boulevard Baton Rouge,
Louisiana 70806 USA 1-225-216-7887
www.presonus.com
What’sin the Box
PRM1 RTAMicrophone
PRM1 Hard Case
PRM1 Shock Mount
PRM1 Foam Windscreen
© 2012PreSonus Audio Electronics, Inc. All Rights Reserved. PreSonus and StudioLive are
trademarks or registered trademarks of PreSonus Audio Electronics, Inc. Smaart is a registered
trademark of Rational Acoustics, Inc. Other product names mentioned herein may be
trademarks of theirrespective companies. All specifications subject tochange without notice.
Part# 820-PRM0022-B
12.7 mm
[0.5”]
192 mm
[7.56”]
21 mm
[0.83”]
19 mm
[0.75”]

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PRESONUS PRM1 and is the answer not in the manual?

PRESONUS PRM1 Specifications

General IconGeneral
TypeStage/performance microphone
Microphone frequency20 - 20000 Hz
Microphone sensitivity-37 dB
Microphone direction typeOmnidirectional
Microphone input impedance200 Ω
Device interfaceXLR-3
Connectivity technologyWired
Signal-to-Noise Ratio (SNR)70 dB
Product colorBlack
Weight and Dimensions IconWeight and Dimensions
Microphone weight150 g
Microphone dimensions (D x H)21 x 192 mm

Related product manuals