PRESONUS Studio 2 - Configuring Your I;O

18
4 Studio One Artist Quick Start
4.3 Creating a New Song
Studio 2|4
Owner’s Manual
4.3.1 Configuring Your I/O
1. Click on Song | Song Setup to set your sample rate and
resolution and configure your audio I/O.
2. Click on the Audio I/O Setup tab.
3. From the Inputs tab, you can enable any or all of the inputs on your
PreSonus Studio 2|4 that you’d like to have available. We recommend that
you create a mono input for each of the inputs on your interface. If you
plan on recording in stereo, you should also create a stereo input as well.