28
en
Conducted RF emission
The product must not send too much noise into the
grid. This could lead to a disruption of other products.
Test standard Emission test class and group
EN 55011 Class B, group 1
Radiated RF emission
The product must not emit RF signals in the room. This
could lead to a disruption of other products.
Test standard Emission test class and group
EN 55011 Class B, group 1
Harmonic current emissions
The product must not unintentionally draw power from
the grid.
Test standard Emission test class and group
IEC 61000-3-2 Class A
Voltage changes, voltage fluctuations and flicker
The product must not affect other products when it is
connected to the grid. For example, these could be lights
that could start flashing and thus bother people in the
room.
Test standard Emission test class and group
EN 61000-3-3 Tested according to the standard.
Electromagnetic emission
To Next Page