Roller rest
The roller rest should be removed and cleaned in hot soapy water at least once a week to
prevent grease restricting the rotation of the wheels. The well in which the roller runs should
be cleaned as well.
Door
The door and door seals should be kept clean at all times. Use only warm soapy water to
rinse. Then dry thoroughly.
DO NOT USE ABRASIVE MATERIALS, SUCH AS CLEANING POWDERS, STEEL OR
PLASTIC PADS.
Metal parts will be easier to maintain if wiped frequently with a damp cloth.
Exterior
Clean with mild soap and warm water, rinse and dry with a soft cloth. Do not use abrasive
materials. Do not spill water in the vents. If the power lead becomes soiled wipe it with a
damp cloth.
Only warm soapy water must be used to clean stainless steel surfaces
GB
A) Control panel
B) Turntable shaft
C) Turntable ring assembly
D) Glass tray
E) Observation window
F) Door assembly
G) Safety interlock system
H) Grill Stand
F
G
A
C B
E
D
SETTING UP YOUR OVEN
Names of Oven Parts and Accessories
Remove the oven and all materials from the carton and oven cavity.
Your oven comes with the following accessories:
Glass tray 1
Turntable ring assembly 1
Instruction Manual 1
Grill stand 1
H
7
To Next Page
Loading...
