EN-1
CONTEN
Package Contents
1. Headphone 2. USB2.0 charging cable
3. Quick Guide V1.0 4. Warranty Card
Hardware Overview
1. Power on/off button
2. Play/pause button
3. Next track/ Volume up (+)
4. Previous track/ Volume down (-)
Status indicator:
• Blue LED flashes very fast indicates the device is powered on and/or connected
• Solid red LED indicates the battery is charging. When the battery has reached full capacity, the solid red
LED will go off.
Basic Operations
1. Charge your headphone
• Use the supplied USB cable to charge the battery directly from your PC.
• Make sure that your PBHS1 headphone is fully charged before using it for the first time.
• The headphone battery has to be initially charged for at least for 4 hours. Thereafter, the battery will take
from 3 to 4 hours to recharge.
2. Advanced operation
Note: Before installing this product, please make sure your laptop has a built-in Bluetooth feature available. If
your laptop is not bluetooth-enabled, you must purchase a bluetooth dongle, preferably version 2.1 or above.
• Pairing the headphones with your laptop
1). Activate the bluetooth program in your laptop to begin setup
2). The “Search new device” screen will be displayed.
3). Place both devices not more than one metre away from each other.
4). Press the power button on the headphone to turn it on. The blue LED will start flashing every second.
This indicates that the headphone has entered pairing mode.
5). When the product name “PBHS1” appears on your laptop, press “pairing”.
6). If the pairing is successful, the blue LED will stay alight.
• Pairing the headphone with your phone
1). Make sure the headphone is off.
To Next Page
General