Presto Lifts Power Stak PPS2200-125AS User Manual

Presto Lifts Power Stak PPS2200-125AS

32 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Power Stak

PPS2200-125AS

Installation, Operation

and Service Manual

Model Number _____________________________________

Serial # ____________________________________________

Date Placed in Service _____________

IMPORTANT: READ CAREFULLY

BEFORE INSTALLING OR OPERATING LIFT

JUNE 2015

This manual covers PowerStak units with frame

numbers starting with GC stamped into the mast

and shipped March 2014 and after.

Table of Contents

Questions and Answers:

J
Jessica SullivanAug 18, 2025
Why is there no electrical power in my Presto Lifts Power Stak PPS2200-125AS?
- E
  Eric RichardsAug 18, 2025
  If your Presto Lifts Lifting Systems unit has no electrical power, ensure the keyswitch is in the "ON" position. Also, check that the E-stop button is not depressed and release it if it is. Clean and tighten any loose or dirty battery connections. Replace any blown fuses. Inspect and repair any faulty wiring from the fuse to the travel control switch, from the travel control switch to the direction contactor. Replace the control switch, or the contactor if faulty.

Presto Lifts Power Stak PPS2200-125AS Specifications

General

Brand	Presto Lifts
Model	Power Stak PPS2200-125AS
Category	Lifting Systems
Language	English

Related product manuals

PowerStack PPS2200-125AS

Preview: Presto Lifts PLS52-185

Presto Lifts PLS52-185