3
Control Master
®
heat control
Basket handle
Steam/fry
basket
Tempered
glass cover
Nonstick
surface inside
and out
Magnetic cord
Cover handle
Fig. D
Steam/drain
hook
Probe
Indicator light
Heat selector
Magnetic cord
Heat
control
Magnetic
plug end
Electrical
pins
Fig. E
Control Master
®
heat control
Before First Use
This versatile appliance braises, steams, boils, blanches, deep fries and more. It is also great for making soups, stews, and desserts.
Beforeusingtheapplianceforthersttime,becomefamiliarwiththevariousparts(Fig.D),readtheinstructionscarefully,andwash
it according to the Care and Cleaning instructions on page 4.
CAUTION! This appliance is not intended to melt wax, gels, plastics, or other materials for making candles or for other hobbyist
activitiesorinanycommercialorbusinessapplication.Usingthisapplianceforpurposesdifferentfromthosespeciedinthe
instruction manual may cause damage to the appliance and will void the warranty.
How to Use
NOTICE: Avoid using no-stick cooking sprays as they may cause the cooking surface to become tacky. In addition, use heat-resistant
nylon, silicone, wooden, or rubber utensils to turn, stir, or remove food when not using the steam/fry basket. Do not use metal utensils
as they may scratch the nonstick surface.
1. Place the appliance on a dry, level, heat-resistant surface away from the wall and the edge of the surface. Do not let the cord hang
or drape over the edge of the counter or table within reach of children. Remove the cover from the appliance.
NOTICE: To prevent possible heat damage to your countertop, place a heat-resistant counter protector, such as aluminum foil,
under the appliance, taking care not to place the foil under the legs.
2. Insert the heat control probe into the appliance so the two electrical pins on the appliance are fully inserted into the heat control.
Then attach the magnetic cord to the heat control by aligning the magnetic plug end with the two electrical pins located on the
back of the heat control (Fig. E).
Due to the fact that the magnetic plug end is polarized, it is intended to be attached to the heat control only one way. The printed
patent information on the plug end should be facing up. The daisy and cautionary language should be facing the counter. When
properly aligned and positioned correctly, the cord end will magnetically attach itself to the heat control.
IMPORTANT: The magnetic cord was designed to detach easily from the heat control. As a result, if bumped or touched during
use, it could detach and cause the appliance to stop heating. Avoid contact with the magnetic cord during operation. If contact
occurs, verify the magnetic cord is still properly connected to the heat control.
3. Using the index on page 4, determine the type of cooking method desired and turn to the referenced page.
4. Plug the appliance into a 120VAC electrical outlet only. Preheat the appliance as indicated by the cooking method and follow the
cooking instructions. During cooking, the indicator light will turn on and off indicating temperature is being maintained.
NOTE: Occasionally you may hear a pop or clicking sound while the appliance is preheating. This is normal and a sign of fast
heatup. You may also notice this sound as the unit cools down.
Whenusingtheapplianceforthersttime,aslightodororlightsmokingmayoccurasmanufacturingresidueevaporates.Thisis
normal.
5. When cooking is complete, turn the heat control to OFF. Remove the plug from the outlet and then remove the magnetic plug end
from the heat control. Allow to cool completely before removing the heat control from appliance and before cleaning.
To assure the continued accuracy of the Control Master
®
heat control, avoid rough handling during use and storage.
Store it in a clean, dry location away from metal objects.
Always check the magnetic plug end of the cord before
use to assure metal items have not become attached.
To Next Page
Loading...
Need help?
General