Presto Kitchen Kettle - Before First Use; Operation; How To Use

3
hobbyist activities or in any commercial or business ap-
plication. Using this appliance for purposes different from
thosespeciedintheinstructionmanualmaycausedam-
age to the appliance and will void the warranty.
How To Use
NOTICE: Avoid using no stick cooking sprays as they may
cause the cooking surface to become tacky. In addition, use
heat-resistant nylon, plastic, wooden, or rubber utensils
to turn, stir, or remove food when not using the steam/fry
basket. Do not use metal utensils as they may scratch the
nonstick surface.
1. Place multi-cooker on a dry, level, heat-resistant
surface away from the wall and the edge. Do not let
the cord hang or drape over the edge of the counter
or table within reach of children. Remove the cover
from the multi-cooker.
NOTICE: To prevent possible heat damage to your countertop, place a heat-resistant
counter protector, such as aluminum foil, under the multi-cooker; take care not to
place the foil under the legs.
2. Insert the probe end of the heat control into the multi-cooker so the two electri-
cal pins on the appliance are fully inserted into the heat control. Then attach the
magnetic cord to the heat control by aligning the magnetic plug end with the two
electrical pins located on the back of the heat control (Fig. E).
Due to the fact that the magnetic plug end is polarized, it is intended to be attached
to the heat control only one way. The printed patent information on the plug end
should be facing up. The daisy and cautionary language should be facing the coun-
ter. When properly aligned and positioned correctly, the plug end will magnetically
attach itself to the heat control.
IMPORTANT: The magnetic cord was designed to detach easily from the heat
control. As a result, if it is bumped or touched during use, it could detach and cause
the multi-cooker to stop heating. Avoid contact with magnetic cord during opera-
tion. If contact occurs, verify that the magnetic cord is still properly connected to
the heat control.
3. Using the index below, determine the type of cooking method desired and turn to the referenced page.
4. Plug the multi-cooker into a 120VAC electrical outlet only. Preheat multi-cooker as indicated by the cooking method and follow the
cooking instructions. During cooking, the pilot light will go on and off indicating temperature is being maintained.
NOTE: Occasionally you may hear a pop or clicking sound while the multi-cooker is preheating. This is normal and a sign of fast
heatup.Youmayalsonoticethissoundastheunitcoolsdown.Whenusingthemulti-cookerforthersttime,aslightodororlight
smoking may occur as manufacturing residue evaporates. This is normal.
5. When cooking is complete, turn heat control to OFF. Remove plug from wall outlet and then remove magnetic plug end from the
heat control. Allow to cool completely before removing the heat control from multi-cooker and before cleaning.
Specic Uses
Your Kitchen Kettle™ multi-cooker/steamer is truly versatile as you can prepare soups and stews, steam vegetables and seafood, and
evendeepfryinit.Becausethismulti-cookerdoessomanythings,thisbookrstprovidesageneraloverviewofhowtouse,clean,and
careforitandthenspecicsectionsonthevariouscookingmethodsavailabletoyou.Detailedinstructionsandrecipescanbefoundon
the pages indicated below:
Cooking Method Page Cooking Method Page Cooking Method Page
Boil (pasta and rice) 7 Deep Fry 7 Steam(vegetablesandsh) 6
Braise 6 Simmer (soups and stews) 4
Fig. E
Probe
Pilot light
Heat selector
Magnetic cord
Heat control
Magnetic
plug end
Electrical
pins
To assure the continued accuracy of the Control Master
®
heat control, avoid rough handling during use and storage.
Store it in a clean, dry location away from metal objects.
Always check the magnetic plug end of the cord before use
to assure metal items have not become attached.
Control Master
®
heat control
Control Master
®
heat control
Basket handle
Steam/fry basket
Tempered glass cover
Nonstick surface
inside and out
Magnetic
cord
Cover knob
Fig. D
Steaming/draining hook