2
ENGLISH
3
3
4
5
6
7
8
9
10
11
12
Contents
CAUTION
Keep this manual for future references.
The illustrations in this manual are for reference
only. They might be different from the real tool.
To gain the best performance of
the tool, prolong the duty life,
make the Warranty valid if
necessary, and to avoid hazards
of fatal injuries please read and
understand this Manual before
using the tool.
NEVER EXCEED the maximum pressure rating (PSI) of the tool or accessory
being worked on.
DO NOT OPERATE THE COMPRESSOR WITHOUT OIL.
Using a lubricating oil other than SAE-30 will void the warranty.
ASSEMBLE the wheels and front support to keep the compressor level.
Perform periodic MAINTENANCE to your machine (page 9).
IF THE COMPRESSOR DOES NOT OPERATE AFTER A PROLONGED TIME OF
INACTIVITY, turn off the thermal switch as indicated on the label attached to the tank.
If the compressor still does not run or does not turn on, contact an
Authorized Service Center.
Use and care recommendations
Technical data
Power requirements
General power tool safety warnings
Safety warnings for pneumatic
compressors
Parts
Preparation
Start up
Maintenance
Troubleshooting
Authorized service centers
Warranty policy
To Next Page
Loading...
