Preval vFan - HOW TO DUST USING 150 FEET OF ENERGY; THINNING GUIDE

Page 11
1/16" HAIRLINE 3" FAN
* These following are estimated values from evacuation testing of one 7-oz. 152a power unit per
type of paint.
**Oil-Based °Water-Based ^One Shot Brand
THINNING GUIDE
Duster w/out
Extension Wand
Black Acrylic
Air-Brush Paint°
White Latex Flat°
Clear Lacquer**
Clear Varnish
Semi Gloss**
Clear (Porch) Gloss
Polyurethane**
Black Lettering Enamel^
Type of
Paint Used
Dilution Thinner Used
Coverage
(Sq. Ft.)
Volume
Used (oz.)
N/A
16 to 1
2 to 1
3 to 1
3 to 1
3 to 1
2 to 1
150
13.7
17.8
47.0
40.2
41.3
29.2
7.0
1.25
0.5
0.5
0.5
0.5
1.0
N/A
Water
Latex X-Tender
®
or Water
Lacquer Thinner
Mineral Spirits
Mineral Spirits
Mineral Spirits
1/16 INCH TO 3 INCH FAN DETAIL:
HOW TO DUST USING 150 FEET OF ENERGY
Secure dusting tip into the top of 150 Feet of ENERGY. For hard to reach areas,
secure the extension wand into the dusting tip insert. Hold compressor unit
upright about 2 to 4 inches from the airbrush parts you are cleaning. Duster
works well for getting into tight spaces such as the airbrush tip, as well as
cleaning larger areas or multiple surfaces. The duster is designed to clear away
sanding debris and is also to be used as a dryer to dry wet area or wet sanding
work. Bend the wand for getting around corners.