23
To adjust the positioning belt for operator comfort:
1. Insert the metal tab on the right side of the belt into the plastic
housing on the opposite strap until you hear a “click.”
See
gure 22.
2. Pull the strap on the right side of the belt until it is secure,
but not so tight as to cause discomfort.
To release the positioning belt:
1. Press the push button mechanism on the plastic housing.
To adjust the positioning belt for operator comfort:
1. Align the two sides of the belt placing the looped-end side
directly above the coarser side (“hook”) of the opposite
belt. Press rmly together to fasten. See gure 23.
To release the positioning belt:
1. Grasp the looped-end side of the belt and pull up to detach
from the other side of the belt.
MANDATORY! Make sure the positioning belt
is properly secured to the scooter and is
adjusted for operator comfort before each
use.
MANDATORY! Inspect the positioning belt
for loose parts or damage, including tears,
worn spots, bent hardware, or damaged
latch mechanisms, dirt or debris, before
each use of the scooter. If you discover a
problem, contact your authorized Provider
for maintenance and repair.
To Next Page
Loading...
