What to do if my Pride Mobility VICTORY SPORT Scooter does not move when I engage the throttle?
If your Pride Mobility Scooter doesn't move when you engage the throttle control lever, push rearward on the manual freewheel lever, turn the scooter off, and then turn it back on to return to normal operation.
What to do if all systems on my Pride Mobility VICTORY SPORT seem dead?
If all systems on your Pride Mobility Scooter appear to be dead, ensure the key is in the 'on' position. Also, check that the batteries are fully charged. Push in the main circuit breaker reset button. Verify that both battery harnesses and the front-to-rear harness are firmly connected. Finally, check that the power down timer feature has not been activated.
What to do if battery condition meter dips way down on Pride Mobility VICTORY SPORT?
If the battery condition meter dips way down and the motor surges or hesitates when you engage the throttle control lever, fully charge your scooter’s batteries.
What to do if the main circuit breaker repeatedly trips on Pride Mobility VICTORY SPORT?
If the main circuit breaker trips repeatedly, charge the batteries more frequently.
What to do if throttle control lever not at center position at start up Pride Mobility VICTORY SPORT?
Return the throttle control lever to the center position, turn scooter off then back on.
What to do if Pride Mobility VICTORY SPORT Scooter battery voltage is too high?
Unplug the charger and/or turn the key off, then back on again.
What to do if current limit time out on Pride Mobility VICTORY SPORT Scooter?
Turn the scooter off for a few minutes, then turn your scooter back on.
What to do if manual freewheel lever is in freewheel position on Pride Mobility VICTORY SPORT Scooter?
Remove the key from the key switch, then push the manual freewheel lever to the drive (rearward) position and restart your scooter.
General| Brand | Pride Mobility |
|---|---|
| Model | VICTORY SPORT |
| Category | Scooter |
| Language | English |
General safety advice, purchaser's agreement, and contact details.
Information on product delivery and methods for providing feedback.
Explanation of safety symbols used on the scooter and its information label.
Mandatory operation, modifications, removable parts, and pre-ride safety checks.
Safe practices for tire pressure, weight capacity, and navigating inclines.
Guidance on safe cornering, braking, driving surfaces, and obstacle handling.
Precautions for weather, freewheel operation, and door navigation.
Safe use of elevators/lifts and battery handling/disposal.
Secure transport, mounting/dismounting, and balance warnings.
Safety concerning drugs, alcohol, smoking, flammability, and EMI/RFI.
Identification and explanation of tiller console controls and indicators.
How to use turn signals, hazard lights, headlights, and the horn.
Adjusting speed and operating the throttle lever for forward/reverse movement.
Location of charger port, fuses, and rear components.
Engaging freewheel mode and installing a safety flag.
Function of the circuit breaker and how to secure the scooter for transport.
Steps and precautions for charging the scooter's batteries.
Interpreting the battery meter and using the charger correctly.
Guidance on charging frequency for optimal battery life and performance.
Types of batteries to use and procedures for replacement.
Essential checks before operating, including seat, tiller, and key.
Key warnings and proper driving techniques for control and stability.
Procedures for safely dismounting and understanding the power-down timer.
How to adjust the tiller angle and install/position mirrors.
Adjusting the seatback angle and seat height for comfort.
Adjusting armrests, seat rotation, and front-to-back seat position.
How to install and adjust the optional positioning belt for operator comfort.
Steps for disassembling the scooter and separating its main sections.
Reassembling the scooter's sections and components.
Understanding fault codes and troubleshooting when systems are unresponsive.
Resolving problems with throttle control, circuit breakers, and battery performance.
Maintaining tire pressure and cleaning exterior surfaces.
Inspecting battery connections, wiring, and plastic shrouds.
Procedures for wheel replacement and fuse replacement.
Guidelines for storing the scooter and proper disposal methods.
To Next Page