What to do if my Pride Scooter does not move when I engage the throttle control lever?
If your Pride scooter doesn't move when you engage the throttle, push rearward on the manual freewheel lever, then turn the scooter off and on again to return to normal operation.
What to do if the battery condition meter dips way down when I engage the throttle control lever on my Pride CELEBRITY X SPORT Scooter?
If the battery condition meter dips way down and the motor surges or hesitates when you engage the throttle control lever, fully charge your scooter’s batteries. If the problem persists, have your authorized Pride Dealer load test each battery.
What to do if attempting to operate the Pride Scooter with the charger attached?
If you're attempting to operate the scooter with the charger attached, turn the scooter key to the off position. Switch off the charger and remove the lead from the charger port, then restart your scooter.
What to do if battery charge is low on Pride CELEBRITY X SPORT Scooter?
If the battery charge is low, charge batteries as soon as possible.
What to do if all systems on my Pride CELEBRITY X SPORT Scooter seem dead?
If all systems on your Pride scooter appear to be "dead", ensure the key is in the "on" position, the batteries are fully charged, the main circuit breaker reset button is pushed in, both battery harnesses and the front-to-rear harness are firmly connected, and the power down timer feature hasn’t been activated.
What to do if the main circuit breaker repeatedly trips on my Pride CELEBRITY X SPORT Scooter?
If the main circuit breaker trips repeatedly, charge the scooter’s batteries more frequently. If the problem continues, have both of your scooter’s batteries load tested by your authorised Pride Dealer. If it doesn't help, contact your authorised Pride Dealer for service.
What to do if the manual freewheel lever is in the forward position on my Pride CELEBRITY X SPORT?
If the manual freewheel lever is in the freewheel (forward) position, turn the scooter key to the off position. Push the freewheel lever to the drive (rearward) position, then restart your scooter.
What to do if throttle control lever is not at center position at start up on Pride Scooter?
If the throttle control lever is not at the center position at start up, return the throttle control lever to the center position, turn the scooter off, and then back on.
Agreement terms accepted by product delivery, prohibiting modifications.
Instructions for checking delivery completeness and reporting damage.
Contact information for feedback, questions, and address changes.
Explanation of symbols used to identify warnings and mandatory/prohibited actions.
Warning against unauthorized modifications or accessories for safety.
Caution against lifting the scooter by its removable parts.
Recommendation to perform a safety check before each use.
Importance of maintaining correct tyre pressure for safety and performance.
Mandatory adherence to specified weight capacity to avoid injury or damage.
Guidance on navigating inclines and ramps safely.
Factors affecting tipping during cornering and how to maintain stability.
Explanation of the scooter's regenerative and disc park brake systems.
Guidance on operating the scooter on various outdoor surfaces.
Cautionary advice for operating on footpaths and roadways.
Instructions for safely navigating obstacles like curbs.
Precautions for operating in rain, snow, extreme temperatures, and wet conditions.
Information on engaging and disengaging freewheel mode and its safety implications.
Prohibition of using stairs or escalators; recommendation to use lifts.
Guidance on how to safely open and close doors with the scooter.
Safety considerations when using lifts with the scooter.
Warnings and recommendations for using vehicle lifts for transport.
Mandatory safety precautions for handling scooter batteries.
Guidance on proper disposal and recycling of scooter batteries.
Advice to turn off the power when stationary to prevent accidental movement.
Safe procedures for transporting the scooter in a motor vehicle.
Importance of correctly fastening positioning belts for safe operation.
Safety tips for safely mounting and dismounting the scooter.
Precautions when reaching or bending to maintain stability.
Advisory on consulting physicians regarding medication and physical limitations.
Warnings against operating the scooter under the influence of alcohol or while smoking.
Information on potential interference from electronic devices and its effects.
Overview of the tiller controls, including speed, lights, horn, and indicators.
Port for connecting the external battery charger.
Fuses protecting the scooter's electrical systems located in the tiller.
Unit converting electrical energy to mechanical power for driving wheels.
Power source for the scooter, providing electrical energy.
Safety feature preventing rearward tipping on inclines.
Lever to disengage drive and brake systems for manual pushing.
Resettable breaker protecting the motor and electronics from overload.
Points for securing the scooter during transport.
How to interpret the battery condition meter on the tiller console.
Step-by-step instructions and safety precautions for charging the scooter's batteries.
Step-by-step guide for replacing the scooter's batteries.
Pre-operation checks including battery charge and lever positions.
Steps for safely mounting and positioning oneself in the scooter seat.
Essential pre-ride checks for seat, tiller, key, and path clearance.
Instructions on steering, speed control, and stopping the scooter.
Steps for safely dismounting the scooter after a complete stop.
Explanation of the automatic power-off feature to save battery life.
How to adjust the tiller angle for a comfortable driving position.
Adjusting the angle of the armrests for comfort and ease of access.
Procedure for adjusting the seatback angle for optimal posture.
Mechanism for rotating the seat to multiple positions for ease of use.
Adjusting the seat position forward or backward for distance.
Steps for changing the seat height for comfortable positioning.
Instructions for installing and adjusting the rear-view mirror.
Guidance on installing and adjusting the optional positioning belt.
Steps for taking the scooter apart into seven main pieces.
Steps for reassembling the scooter from its disassembled parts.
Explanation of diagnostic flash codes for identifying scooter issues.
Maintaining correct tyre pressure for safety and performance.
Cleaning and conditioning of the scooter's exterior surfaces.
Guidelines for cleaning and disinfecting scooter parts safely.
Information about the scooter's plastic shrouds and their finish.
Information regarding periodic adjustment of the handbrake.
Regular checks of wiring connections and insulation for wear or damage.
Procedures and warnings for replacing scooter wheels.
Ensuring battery terminal connections are tight and uncorroded.
Periodic inspection of motor brushes by an authorized dealer.
Information on prelubricated and sealed axle bearings and motor assembly.
Keeping these areas dry and allowing them to dry if exposed to moisture.
Importance of replacing nylon insert lock nuts after removal.
Instructions and warnings for replacing scooter fuses.
Recommendations for proper storage of the scooter for extended periods.
Guidance on proper disposal of the scooter according to regulations.
Coverage for structural frame components and welds.
Coverage for the drivetrain, including transaxle, motor, and brake.
Coverage for electrical parts like controllers and battery chargers.
Warranty coverage for scooter batteries from the original manufacturer.
Items classified as wear items and exclusions from warranty coverage.
To Next Page
General
