Milford Person Lift www.pridemobility.com 10
COMPONENT DESCRIPTION
SOCKET
The Standard Milford Person Lift power
socket is located at the side of the mounting
post (shown fitted into a vehicle).
The cord on the lift should be directly
connected.
HANDSET
The Handset is extremely simple, with one
button for Up and one for Down.
Releasing the button stops lifting or lowering.
ARM
Once the person is seated, remove the
spreader bar, extension arm and lift arm and
place in the storage bag for use upon arrival
at your destination.
STORAGE BAG
The large carry bag is supplied with the
Milford Person Lift to store the lift arm,
extension arm, spreader bar and sling when
not in use.
I I I . T E C H N I C A L
To Next Page
Loading...
