Quantum 610 www.pridemobility.com 5
II. SAFETY
PRODUCT SAFETY SYMBOLS
The symbols below are used on the power chair to identify warnings, mandatory actions, and prohibited actions.
It is very important for you to read and understand them completely.
NOTE: There are more warnings identifi ed and explained in the Consumer Safety Guide that is included with
your power chair. Please become familiar with all the warnings and safety information found in the Consumer
Safety Guide and refer to this resource often.
Indicates power chair securement points.
Indicates that power chair, with similarly labeled seating system, conforms to ISO
7176-19 for transport of an occupied power chair in a motor vehicle.
Class II Equipment
Manufactured in
Power chair information label
Indicates that power chair with a similar label is not rated for occupied transit.
Locked and in drive mode.
Place unit on level ground and stand to one side when changing from drive mode to
freewheel mode or freewheel mode to drive mode.
Unlocked and in freewheel mode.
Read and follow the information in the owner’s manual.
To Next Page
Loading...
