38
Victory Viper
X. CARE AND MAINTENANCE
AXLE BEARINGS AND THE MOTOR/TRANSAXLE ASSEMBLY
You do not need to lubricate these items, as they are all prelubricated and sealed.
CONSOLE, CHARGER, AND ELECTRONIC CONTROLLER MODULE
n Keep these areas away from moisture.
n Before operating your scooter, allow any of these areas to dry thoroughly if they have been exposed to
moisture.
STORAGE
Refer to How should I store my Victory Viper and its batteries? in V. Batteries and Charging.
FUSES
In the event a fuse should blow (cease to work):
1. Remove the fuse by pulling it straight out of its slot.
2. Examine the fuse to be sure it is blown. See figures 8 and 8A.
3. Insert a new fuse of the proper rating.
To Next Page
Loading...
