3 - Operating Instructions
3.4 Setting the pressure
Clockwise will increase the
pressure
Anti-Clockwise will
decrease the pressure
1. Before adjusting the pressure knob (3) ensure
that the press is in the open position.
2. With the press open turn the pressure knob
(3) to adjust the pressure, clockwise increases
the pressure and counter-clockwise will lower
the pressure.
It is important that you change the force that is applied by the press to suit the substrate that is
being used. Follow the steps below to adjust the pressure.
If you have any further questions about the operation of your heat
press please do not hesitate to contact our Tech Support Team
using the details below
+44 (0) 01228 712128
techsupport@primaheatpresses.com
3
Warehouse 3, Browns of Carlisle, Carlisle, Cumbria, CA5 6LF www.primaheatpresses.com +44 (0) 01228 712128 VAT No. GB944407715
To Previous Page
Loading...