DVD System Setup
.... SETUP
/" , SETUP
Navigating the General Setup Menu
1.Press the SETUPbutton, the
General Setup Page,Preference
Page will be displayed in turn.
2.Press AorY to select, the
item, then press_ toenter the
submenu.
3.Press A or Ytochange the
setting, then press PLAY/ENTER
to confirm your selection.
4.Press EXiT keyor pressSETUP
repeatedly to exit the set-up
menus.
Angle Mark On 4: 3;Lb
OSDLang ENG16:9
Caption On
General Setup Menu
ASPECT RATIO DESCRIPTWON
When using theDVD with the internal TV,
select4_ 3LB.
T/J_ /bHo_ ing i_/bfvndtion d/),uli_s otJl_
_l,/l(_s_tt'_(, D _'Z) ozMt,_z_tis conn_ct(_] to ¢tn
_'Xt_'f'z_d] TK
Angle Mark On 4: 3_Lb
OSD Lang ENG 16:9
®4: 3/PS (PS = Pan and Scan) Caption On
You may select if you have a normal aspect ScreenSaverOff
ratio (4:3) TV, although the NORMAL/LB
(letter box) is a more common choice. In PS
mode, widescreen material will fill the screen, but at the expense of chopping
off extreme left and right edges of the original film picture. For this feature to
work, the disc must be specially coded. Such discs are uncommon.
o4: 3/LB (LB = Letter Box)
You may select this if you have a normal aspect ratio (4:3) T_( Widescreen
material will be shown in pure unaltered form, allowing the entire picture area
of the original film to be viewed without any side cropping. Black bars will
appear above and below the picture.
o16:9
You may select this if you have a widescreen (16:9) T',ZBack bars may still
appear above and below the picture even if using a widescreen TV. This is
because some film directors prefer to use ultra widescreen aspect ratios e.g.
2.35:1. This will normally be indicated on the DVD packaging.
@
To Next Page
Loading...