Need help?Do you have a question about the Prima MIG 210 SYNERGIC and is the answer not in the manual?
General| Type | MIG/MAG |
|---|---|
| Welding Method | MIG/MAG |
| Input Voltage | 230V |
| Welding Current Range | 30-210 A |
| Wire Diameter | 0.6 - 1.0 mm |
| Synergic Control | Yes |
| Protection Class | IP21S |
Essential protective measures for eyes, skin, and body during welding operations.
Guidelines to prevent fires and explosions caused by welding sparks and hot materials.
Critical warnings and procedures to avoid dangerous electric shock.
Measures to protect hearing from potentially damaging noise levels during welding.
Description of essential controls like ON/OFF, voltage selector, mode selector, and indicators.
Proper placement criteria for the welder, considering environmental factors and airflow.
Guide to setting welding parameters in synergic mode using material, wire, and gas selection.
To Next Page