PREPARING TO USE
1. Take the cotton candy maker out of the cardboard case and remove all
packing materials.
2. Wash extractor head assembly and bowl in warm water.
3. Align hooks of the body with the openings of the bowl. Turn bowl anti
clockwise to lock bowl to the body. (A)
4. Install the extractor head assembly. Be sure to push the extractor head
downward firmly to seat properly. Improper seating of the extractor head
assembly may result in failure to produce cotton candy or will result in
excessive vibration. (B)
5. Operate the unit on a flat level surface.
6. Plug the power cord into a suitable 220-240V AC outlet.
O
F
F
ON
A
OFF
O
N
B
HOW TO USE
1. Switch on the unit for 5-8 minutes, allow it to warm up then switch off.
2. Place two scoops of pure granulated sugar into the center of the extractor
head to be spread evenly (please use the scoop supplied with the unit, or
you may use one level tablespoon). (C)
O
FF
ON
C
NOTE
• Do not put more than two measures of sugar. Excessive sugar causes
noise and vibration.
• USE ONLY PURE GRANULATED SUGAR FOR THIS COTTON CANDY
MAKER.
• Use of other sugar may fail to produce cotton candy.
• Do not use sugar mixed with other materials such as coffee or dry
milk. It will cause a blockage of the extractor head.
• Never use materials other than pure granulated sugar, such as salt.
To Next Page
Loading...
