P\Pyrolytic Function
This oven can clean itself by a process known as pyrolysis, heating the cavity to a
temperature of approximately 430˚C. This will burn off the residue from spattering and
spillages caused by
cooking. Pyrolytic programmes should be used when the
oven
smokes during preheating or
cooking or if the oven smells even when cold.
It is not necessar
y to run a pyrolytic programme after every use of the oven.
Do not wait until the oven is coated in grease to run a pyrolytic programme.
The smoke produced by pyrolysis is broken down by passing through a catalyser.
Please note: Before selecting pyrolytic programme, remove all shelves, trays and
other accessories
from the oven and clean up any major spills to avoid the risk of fire
or
excessive smoke.
Do not hang towels or cloths on the oven handle during pyrolysis.
The programme immediately locks the door and starts the cooling fan at a slow
setting; the cooling fan speed increases to its maximum when the oven heat builds
up.
Note: This function has an added safety feature to prevent it from being selected
accidentally. To
run the py
rolytic function, select “Pyrolytic” function on the
“Function Sel
ector Display”, Then touch the “ ” key to confirm the selection.
Economy Grill (variable)
Use the economy grill to grill or brown mall amounts of food. Locate the grill
pan in the 4th or 5thshelf position. Pre-heat the grill for 5 minutes before use .
Warning! When the grill is in use accessible parts can become hot. It is best to
keep children away from the oven.
Fan grill element
The oven actives the grill top heater and fan function. In practice, this function
allows
the grilling process to be speeded up an improvement in the taste of
dish,
you should
only use the grill with the oven door shut.
5
To Next Page
Loading...
Need help?
General
