” flashes on the display, and time
Timer
To set the timer you should:
1. Touch button“ ”until the timer “
2. Touch “ ”or “ ” to set time.
3. touch button“ ” to confirm.
4. The “ ” stop flashing, the time will begin to count down.
5. Alarm sounds when the set time has been reached, and the alarm icon“
” will flash.
”,the alarm signal will go off. or it will be turned off6. Touch button “ ”, or “
automatically after 90 seconds.
7. If you want to cancel the timer, you can set the time to “ 0:00 ”.
Caution
● Always keep the control panel clean, or the grease may damage the touch panel.
● Touch panel need to be regular cleaned by soft cloth.
● I f alarm countdown time, cooking time, and clock functions are set up,
the display will
show the alarm count down.
● The alarm time range is 1 second to 23 hours 55 minutes. Alarm is just to reminder, it
does not turn the oven off.
Semi-automatic operation
This mode is to set the oven cooking time, when time is reached, the oven will turn
off and a alarm sound will be heard.
Set the cooking time when ON/OFF button “ ” is on, and the oven is working:
1. Touch button“ ” twice, cooking time “ ” flashes, display shows “ 0:00 ”.
”or “ ” to set the cooking time .
2. Touch“
3. Touch “
” to confirm, the cooking time“ ” lights on, time set saved.
4. Set cook time run out, oven stop heating, alarm sounds, the cooking time icon “ ”
and temperature icon both flashin
.
g
,the alarm signal will go off. or it will be turned off
5. Touch button “ ”, or “
”
automatically after period of time.
For example
Current time is “2:00”, set cook time to 1 hour, so oven stop heating when“ 3:00”.
Alarm sounds, the cooking time icon “ ” and temperature icon both flashing.
”,the alarm signal will go off or it will be turned off
Touch button “ ”, or “
autimatical after period of time.
6. If you want to cancel the cooking time, you can set the cooking time to “ 0:00 ”.
Automatic operation
Touch button “ ” to set end time only after set cook time.
Set end time when the ON/OFF button “
” is on, oven is working, and cook
1. Touch button“ ”for
3 times, the end of cooking time icon“
” flashing.
”or “ ” to set the end of cooking time
. 2. Touch“
3. Touch“ ” to confirm, the end of cooking time“ ” light on, setting is saved.
4. Oven stop heating when reach setting end time, alarm sounds, the cooking time “
" and temperature icon
both
flashing.
”, the alarm signa l will go o ff or alarm signal will be turned
5. Touch button “ ”, or “
display “0: 00”.
time already se:t
off automatically after period of time.
For example
The current time is 2:00, set the cooking time to 1 hour, and set the end of cooking time to
“3:00”, if not
adjust end of cooking time by “
”, but touch“
” to save, then the
oven will stop heating by “ 3:00 ” .
If you touch button“ ” to adjust the end of cooking time to“3:30” , and touch button“
”to save ,
then
the
oven start working at “ 2:30”and stop at “ 3:30”
Caution
End of the work time priority display than the current time
We suggest that you supervise the first few cooks to make sure time temperature are right.
Then you can make adjustment to avoid over or insufficient cook.
Cooking time range: 0 < t < 24 hours
End of cooking time range: current time < end of cooking time ≤ current time
+ waiting time + cooking time
End of cooking time = current time + waiting time + cooking time
The cooking time、waiting time and end of cooking time range:
To Next Page
Loading...
Need help?
General
