Primada PS810 - Page 23

1. Prepare food ingredients in the recipe
and put them into the blender cup
2. Add water not over the maximum level
marking
4. Tighten the lid clockwise on the
blender cup
5.Place the blender cup on top of the
motor base.
Connect
3. Tighten the feeding cover anti-clockwise
on the lid
①
6.Connect to power
supply
3. Operating
3.1 Operation and Use
Line up the
upper and
lower couplers
so that it
seats properly
Tighten the lid
clockwise
Line up with handle
Tighten the feeding cover
anti-clockwise
Crop in 5cm
Maximum
Capacity
marking
Maximum
Capacity
1000ml
EN
19