PRIMAL TREESTANDS WRAITH 270 User Manual (English)

To Next Page

SET UP INSTRUCTIONS

Step 1:

Remove blind from carry bag. While the blind is still folded, set blind on ground with

the corners pointing up and the hubs facing the down.

Step 2:

Release the blind and let it unfold. The roof hub should be facing up.

Step 3:

While holding a corner of the blind with one hand and the roof hub loop with the other,

pull upwards on the roof hub to expand the roof of the blind.

Step 4:

Lift one edge of the roof up while the other edge is resting on the ground. Grab a hold

of a wall hub loop and pull to expand the wall.

primaltreestands.com

Step 5:

Walk around the blind and expand the remaining walls.

Step 6:

Place blind in the desired location and secure each corner to the ground using the

ground stakes supplied. To reinforce the blind from the wind, attach the tie down

ropes to each wall hub loop and stake to the ground.

WRAITH 270

Hub Style Ground Blind

TREESTANDS

Corners

STEP 1 STEP 2

STEP 3

Roof Hub

Hubs

STEP 4 STEP 5 STEP 6

WARNING: Read all instructions and safety warnings and follow them thoroughly. Failure to follow

these instructions may result in serious injury or death.

Need help?

Do you have a question about the PRIMAL TREESTANDS WRAITH 270 and is the answer not in the manual?

PRIMAL TREESTANDS WRAITH 270 Specifications

General

Weight Capacity	300 lbs
Weight	20 lbs
Material	Aluminum
Climbing System	Cable
Seat Height	20 inches

Summary

Set Up Instructions

Step 1: Remove Blind from Carry Bag

Remove the blind from its carry bag and place it on the ground with corners up and hubs down.

Step 2: Release and Unfold Blind

Release the blind to let it unfold, ensuring the roof hub is facing upwards.

Step 3: Expand the Roof

Pull upwards on the roof hub loop to expand the blind's roof structure.

Step 4: Expand the Walls

Lift a roof edge and pull a wall hub loop to expand the blind's walls.

Step 5: Expand Remaining Walls

Walk around the blind and expand all remaining wall sections.

Step 6: Position and Secure Blind

Place the blind, stake corners, and attach tie-down ropes for wind reinforcement.

Take Down Instructions

Step 1: Remove Ground Stakes

Remove all stakes securing the blind to the ground.

Step 2: Collapse the Walls

Push inward on wall hubs from outside the blind to collapse walls.

Step 3: Collapse the Roof

After collapsing walls, push down on the roof hub to collapse the roof.

Step 4: Pack the Blind

Gather blind corners, slide the carry bag over them, and down over the entire blind.

PRIMAL TREESTANDS WRAITH 270 User Manual