PrimaLuceLab SpA SESTO SENSO 2 user manual
English
WARNING
If improperly handled, SESTO SENSO 2 may damage. So please follow the instructions below:
•
Do not disassemble
•
Do not open, damage or subject to electric shock or excessive impact any part of SESTO SENSO 2. Do not drop.
•
Do not short the electronic elements
•
Do not expose at temperatures below -20°C and above +60°C
•
Do not burn or incinerate any component.
•
Do not expose to rain or other atmospheric effect related to water
•
Do not bend, modify or force any part of SESTO SENSO 2
Index
Components Identification 2
Contents of the package 2
Technical specifications 3
Installing SESTO SENSO 2 on the telescope’s focuser 4
Controlling SESTO SENSO 2 with EAGLE or computer with Windows OS 6
Controlling SESTO SENSO 2 with Virtual HandPad 14
SESTO SENSO 2 Advanced Settings 17
Controlling SESTO SENSO 2 with ASCOM drivers and third party softwares 19
Controlling 2 SESTO SENSO 2 units at the same time 23
Updating SESTO SENSO 2 firmware 24
Installing 26mm, 33mm or 37mm adapters for SESTO SENSO 2 25
Troubleshooting 26
INFORMATION TO USERS 28
QUALITY CONTROL
Each SESTO SENSO 2 unit, after created in our laboratories, it’s tested by PrimaLuceLab technical experts to check all com-
ponents. We verify mechanics and electronics. In case you check any malfunction, please contact us immediately (+ 39-0434-
1696106 or support@primalucelab.com). Do not try to disassemble, repair or modify yourself SESTO SENSO 2, without our
written approval, in order not to loose the Producer Warrantee.
To Next Page
Loading...