PrimaLuceLab SESTO SENSO 2

To Next Page

To Previous Page

PrimaLuceLab SpA SESTO SENSO 2 user manual

Then, by using the provided Allen screw, please ﬁx the screws that ﬁx the outer ring of SESTO SENSO 2 to your

focuser.

Finally, use the Allen screw to lock the 3 small grub screws ﬁx the outer ring of SESTO SENSO 2 to your focuser.

page 5

NOTE: After installing SESTO SENSO 2 on your focuser, check the smoothness of the movement keeping SE-

STO SENSO 2 powered off and then manually moving the focus knob of your focuser. The presence of SESTO

SENSO 2 will make the movement harder (since the motor is connected) but the motion must still be uniform. If

you notice an uneven movement, repeat the installation procedure.

NOTE: SESTO SENSO 2 connects to several focusers that may have different machining and tolerances preci-

sions. Focusing accuracy, especially when using automatic focusing procedures, depends on the focuser me-

chanics and not only strictly on SESTO SENSO 2. If your focuser has an important backlash, you can adjust the

backlash parameter in the software.

PrimaLuceLab SESTO SENSO 2 - Page 6