222
222
Continued...
Note(s)
-> If the water sample has little or no turbidity after correctly adding the
reagents, the water sample must be treated specially.
Ask the supplier of this set after a detailed instruction for pretreatment
of the sample.
-> If unexpected / inconsistent test results appear, this can be due to a
contamination of the sample or to confounding factors in the sample water.
Ask the suppliers of this set for a detailed statement to eliminate interference
factors in the water sample.
(85) Polyacrylate
1 - 30 mg/l
Liquid
Name on device: 85-Polyacryl-liq
To Next Page