229
229
Liquid
+Powder
Continued...
11) After the lapse of a 10 minute countdown the determined result is
displayed. Press button 3 to convert this into various measurement units
(*).
12) Press button 4 to save the result together with date and time in the
device.
3
4
Note(s)
-> (*) Conversion to Si
-> The temperature of the water sample must be between 20°C and 30°C to
ensure precise measurements.
(49) Silica (LR)
0 - 5 mg/l (SiO )
2
!
Possible messages in the line below the measurement value:
"low! / high! / good!":
Assessment of the measurement value relative to the ideal range defined by you.
"Overrange! / underrange!":
Measurement value for this parameter is outside the value range of this method.
Name on device: 49-Silica-LR-liq
To Next Page
Loading...