EasyManua.ls Logo

PrimeLab 1.0 MULTITEST - Page 272

PrimeLab 1.0 MULTITEST
353 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
239
239
Tablet
Continued...
Note(s)
-> (*) Conversion to H S
2
-> The temperature of the water sample must be at 20°C to avoid inaccuracies
in the measurement.
10) Press button 4 to save the result together with date and time in the
device.
4
(52) Sulphide
0.04 - 0.5 mg/l (S)
Name on device: 52-Sulphide-tab
!
Possible messages in the line below the measurement value:
"low! / high! / good!":
Assessment of the measurement value relative to the ideal range defined by you.
"Overrange! / underrange!":
Measurement value for this parameter is outside the value range of this method.