241
241
!
Possible messages in the line below the measurement value:
"low! / high! / good!":
Assessment of the measurement value relative to the ideal range defined by you.
"Overrange! / underrange!":
Measurement value for this parameter is outside the value range of this method.
Liquid
0 - 0.7 mg/l (S)
(140) Sulphide
Name on device: 140-Sulphide-Ha
Continued...
11) After the lapse of a 10 minute countdown the determined result is
displayed. Press button 3 to convert this into various measurement units
(*).
12) Press button 4 to save the result together with date and time in the
device.
4
Note(s)
-> (*) Conversion to H S
2
-> The temperature of the water sample must be at 20°C to avoid inaccuracies
in the measurement.
3
To Next Page
Loading...