22
22
Tablet
0 - 2 mg/l (B)
Continued...
Note(s)
-> (*) The test result can be converted to the following unit: H BO
3 3
-> The pH value of the water sample should be between 6 and 7 pH.
-> The temperature of the water sample has an influence on the measurement
precision and should be at 20°C (+/- 1°C).
(07) Boron
Name on device: 07-Boron-tab
!
Possible messages in the line below the measurement value:
"low! / high! / good!":
Assessment of the measurement value relative to the ideal range defined by you.
"Overrange! / underrange!":
Measurement value for this parameter is outside the value range of this method.
To Next Page
Loading...