Need help?Do you have a question about the PrimeScales PS-IN202 and is the answer not in the manual?
Lists the contents included in the product packaging.
Details how to connect the indicator to the weigh platform and load cells.
Explains the RS-232 serial port connection for printers or computers.
Describes how to connect the indicator to a power source using the AC adapter.
Guide to entering and navigating the indicator's setup menu.
Instructions on how to properly exit the setup configuration mode.
Overview of the user menu for serial port and other user options.
Detailed explanations of parameters within the Setup Menu.
Detailed explanations of parameters within the User Menu.
Procedure for performing the zero point calibration of the weighing indicator.
Procedure for performing the span (test weight) calibration of the indicator.
How to view previously entered zero and span calibration values.
Method for manually entering a zero calibration value.
Method for manually entering a span calibration value.
Explanation of the main display layout and segments.
Details on LED enunciators and their meanings.
Description of the function of each key on the indicator's keypad.
Steps for performing a standard weighing operation.
Instructions on how to use the tare function for accurate measurements.
General| Model | PS-IN202 |
|---|---|
| Category | Accessories |
| Auto Shut-off | Yes |
| Accuracy | 100 g |
| LCD Display | Yes |
| Units of Measurement | kg |
| Platform Size | 30 x 30 cm |
To Next Page
