EasyManua.ls Logo

Primetime Petz Safety Mate User Manual

Primetime Petz Safety Mate
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Safety Mate
Expandable Pet Gate
ASSEMBLY INSTRUCTIONS
& USER GUIDE
Manufactured by:
Primetime Petz LLC
519 Interstate 30 #119, Rockwall, TX 75087
info@primetimepetz.com • 214-257-8068
www.primetimepetz.com
Question and Answer IconNeed help?

Do you have a question about the Primetime Petz Safety Mate and is the answer not in the manual?

Primetime Petz Safety Mate Specifications

General IconGeneral
BrandPrimetime Petz
ModelSafety Mate
CategoryIndoor Furnishing
LanguageEnglish

Summary

Safety & Product Care

Important Safety Warnings

Crucial safety precautions, usage limitations, and warnings for safe operation and prevention of injury.

Chewing Deterrent Recommendation

Suggests misting the gate with a bitter-type serum to discourage chewing.

Product Cleaning Instructions

Instructions for cleaning and maintaining the product, including recommended cleaning agents and avoiding harsh chemicals.

Parts Identification

Gate Assembly Steps

Step 1: Bottom Frame Assembly

Inserting vertical spindles and metal pins into the bottom frame.

Step 2: Top Frame Attachment

Attaching the top frame to the vertical spindles using metal pins.

Step 3: Frame Side Connection

Attaching frame sides to the top and bottom frame, and repeating for a second panel.

Step 4: Panel Connection Hardware

Inserting cylinder nuts and attaching bolts/nuts to connect gate panels, noting extensions.

Step 5: Connecting Gate Panels

Measuring opening width, determining connection points, and connecting panels with binding barrels and screws.

Gate Installation Guide

Step 6: Wall Mounting Preparation

Marking and drilling holes, inserting wall anchors, and attaching mounting hardware to the wall.

Step 7: Bolt and Hinge Adjustment

Inserting angle bolts into hinges and adjusting straight bolts for latch and saddle engagement.

Step 8: Securing Gate Stability

Tightening hex nuts with the hex wrench to secure the gate's stability.

Step 9: Hinge Cover Lock Installation

Attaching hinge cover locks and instructions for their removal.

Unlocking the Gate Mechanism

Instructions on how to unlock the gate by pressing the button and lifting the frame.