To Next PageTo Next Page
Need help?Do you have a question about the Primex XR series and is the answer not in the manual?
Covers license requirements, product compliance statements, and RF exposure guidelines for FCC and Industry Canada.
Essential precautions for installation, operation, and maintenance to prevent damage and ensure safety.
Explains how the transmitter synchronizes time wirelessly using GPS or NTP sources.
Details the step-by-step process when the transmitter is powered on.
Physical dimensions of the transmitter unit.
The weight of the transmitter unit.
Configuration options for Time Zone and Daylight Saving Time.
Recommendations for selecting an optimal location for the GPS receiver for best signal reception.
Illustrates a typical system configuration with the transmitter and NTP time source.
Lists the transmitter unit and recommended optional accessories like UPS.
Lists the specific tools required for installing the GPS receiver.
Provides recommendations for optimal placement of the transmitter for system operation.
Details the specifications for the GPS receiver unit.
Provides recommendations for optimal placement of the GPS receiver unit.
Lists the components included in the GPS receiver mounting kit.
Step-by-step instructions on how to physically mount the GPS receiver unit.
Illustrates the components used for GPS receiver installation and mounting options.
Instructions for connecting the internal antenna to the transmitter.
Explains how to connect the time source (GPS or NTP) to the transmitter.
Details the specifications for each connection port on the transmitter.
Introduces the process of configuring the transmitter to use NTP as its time source.
Lists the factory default IP address, subnet mask, and NTP time source.
Step-by-step guide to configure the transmitter for NTP time synchronization.
Procedure to assign a temporary IP address to the transmitter for configuration.
Configuration of the channel number, preset by factory.
Setting the time zone dial on the transmitter.
Lists the dial settings for various time zones.
Setting the transmitter dip switches for time source and other configurations.
Steps to confirm the transmitter is functioning correctly after setup.
Describes the LCD display elements and status indicators on the transmitter.
How to navigate to the main menu on the transmitter's front display.
Lists the available options within the main menu for viewing settings and diagnostics.
Instructions on how to access the switch settings from the main menu.
Explains the meaning of the information displayed for each switch setting.
Instructions to access the GPS Setup menu for GPS receiver configuration.
Instructions to access the diagnostic menu for viewing transmitter configuration.
Overview of the entries available in the diagnostic menu.
How to locate and identify active error codes using LED indicators and menu entries.
Provides definitions for various diagnostic error codes that may occur.
Step-by-step instructions for viewing diagnostic error codes on the transmitter.
Procedure to clear logged error codes and stop LED flashing.
Information on obtaining support through authorized Primex partners.
Guidelines and required information for contacting Primex Technical Support.
Contact details and hours for Primex Technical Support.
Details the product warranty period, coverage, and limitations.
Instructions on how to obtain warranty service and return merchandise.
General