Primo Water 900179 - User Manual

900179
Botttled Water
Pump
Assembly
1. Assemble tube to desired length per illustrations below
2. Attach assembled tube to bottom of pump
3. Remove tamper label from top of bottle
4. Insert tube into bottle
5. Tighten collar to seal bottle
6. Attach cap to spout and connect spout to pump
Use
1. Place cup, glass or pitcher under spout
2. Press down on top of pump several times to make water flow
Cleaning and Care
1. Clean pump with a cloth, mild dishwashing soap and water
2. Clean tubes and spout in dishwasher
3. Store disassembled in a clean, dry location
Questions
Call 866-429-7566 for assistance
D
C
C
B
A
A
B C D
PN O-030 © 2008 Primo Water Corporation

Summary

Assembly

Assemble tube to desired length

Assemble the water pump tube to the required length per illustrations.

Attach assembled tube to pump

Connect the assembled tube to the bottom section of the pump.

Remove tamper label from bottle

Remove the tamper-evident label from the top of the water bottle.

Insert tube into bottle

Place the water pump tube into the bottle opening.

Tighten collar to seal bottle

Secure the collar to create a seal around the bottle opening.

Attach cap to spout

Fix the cap onto the spout and connect the spout to the pump.

Use

Place cup under spout

Position a cup, glass, or pitcher beneath the pump's spout.

Press pump to dispense water

Push the top of the pump multiple times to make water flow.

Cleaning and Care

Clean pump with cloth

Wash the pump using a cloth with mild dishwashing soap and water.

Clean tubes and spout

Wash the pump's tubes and spout in a dishwasher.

Store disassembled pump

Keep the pump parts disassembled in a clean, dry place.

Primo Water 900179 Specifications

General

Model Number	900179
Category	Water Pump
Power	60W
Cord Length	6 ft
Material	Plastic
Voltage	120V