Need help?Do you have a question about the Primus Wind Power Air X and is the answer not in the manual?
General| Brand | Primus Wind Power |
|---|---|
| Model | Air X |
| Category | Wind Turbines |
| Language | English |
Explains the meaning of icons used throughout the manual for safety guidance.
Details the scope of what the limited warranty protects against for the wind turbine.
Specifies the duration and start dates for the limited warranty coverage.
Provides instructions on how to initiate a warranty claim and contact support.
Lists conditions and scenarios not covered by the limited warranty.
States legal disclaimers regarding implied warranties and consumer rights.
Defines the extent of the manufacturer's liability for damages.
Outlines the manufacturer's right to modify products and void warranty.
Specifies governing law, jurisdiction, and legal terms for the warranty.
Provides critical torque values for assembling the turbine and its components.
Summarizes the available tower choices and recommends reviewing user manuals.
Illustrates the recommended wiring for a single turbine to the battery bank.
Details wiring configurations for hybrid systems including solar panels.
Explains methods for wiring multiple Air X turbines together for a system.
Provides charts for selecting appropriate wire sizes based on system voltage and distance.
Recommends and explains the installation and use of a stop switch.
Details recommended fuse sizes and the use of an ammeter for system protection.
Discusses battery choices, minimum bank sizes, and important battery types.
Explains the importance and methods of grounding the turbine for safety.
Provides guidance on grounding the turbine tower to prevent hazards.
Describes how to make electrical connections from the turbine to the system wiring.
Details the procedure for mounting the turbine assembly onto the tower structure.
Guides on making final electrical connections to the battery bank.
Provides an overview of how wind turbines capture kinetic energy and produce power.
Explains different operational states like charging, regulation, stall, and braking.
Describes how the turbine monitors and adjusts voltage to charge batteries.
A diagnostic test to verify turbine shaft behavior and wiring.
A test to check the turbine's LED response when connected to a battery.
Tests charging capability and resistance by spinning the rotor with a drill.
To Next Page
