Princess auto mr.blacksmith - Diagnosing EPB on Audi (Continued); Handling Audi EPB Trouble Codes; Reading Audi EPB Codes via Individual Function; Audi EPB Repair Procedures

4. Use UP/DOWN button to select For Pad Change from Guided Function menu and press
ENTER button to confirm.
>1) For Pad Change
2) For Repairs
Press ENTER button to continue and EXIT to exit.
Guided Test Condition
1) Turn ignition on
2) Release Emergency Parking Brake (EPB)
Diagnose EPB On Audi Cont.
3) Shift to P position
Y = Continue N = Exit
Press ENTER button to continue and EXIT to exit.
Trouble Codes
Trouble: 02596 Rear Brake Pads Worn
3) Shift to P position
Y = Continue N = Exit
Read Codes
Scan Fault:
Requirement:
1) Turn ignition on
2) Release
3) Shift to P position
Press Y to Exit
5. Use UP/DOWN button to select For Repair from Guided Function menu and press ENTER
button to confirm.
1) For Pad Change
>2) For Repairs
Press ENTER button to continue and EXIT to exit.
Guided Test Condition
1) Turn ignition on
2) Release Emergency Parking Brake (EPB)
3) Shift to P position
Y = Continue N = Exit
Press ENTER button to continue and EXIT to exit.
Open Brake
Next the brake will be completely opened
Y = Continue N = Exit
Select the purpose of deactivation properly.
For Pad Change is used to open the brake calipers completely for changing of worn pads.
For Repairs is used for repairs other that pad change. The Calipers will not open wide enough
to install new pads. Only enough to get the existing pads out for other repairs.