What to do if “H2O” is illuminated on PRINCESS HOUSE Coffee Maker display?
If the display panel of your PRINCESS HOUSE Coffee Maker illuminates “H2O”, it means you need to add water to the reservoir. After adding water, press “Brew” again. Note that the brewing cycle will start over, so check the liquid level in the cup. It's also recommended to use a new coffee pod.
How to clean stubborn residue from my PRINCESS HOUSE Vida Sana?
For stubborn cleanup of your PRINCESS HOUSE Blender due to ingredients dried inside, fill the cup about 2/3 full with warm, soapy water and screw on the Milling Blade. Place the cup assembly on the blender base, then power the unit for about 20-30 seconds.
What to do if the blade of my PRINCESS HOUSE Vida Sana Blender is not running smoothly?
If the blade in your PRINCESS HOUSE Blender isn't running smoothly, stop the blender and try adding some liquid or removing some of the solid ingredients from the cup.
How to remove a stuck blade assembly from my PRINCESS HOUSE Vida Sana Blender?
If the blade assembly of your PRINCESS HOUSE Blender is hard to remove after blending, it may be due to pressure building up and creating a vacuum. Ensure the components are dry, and use a towel or jar opener to help separate the blade assembly from the cup.
What to do if the blade is not running smoothly in PRINCESS HOUSE Vida Sana Blender?
If the blade of your PRINCESS HOUSE Blender is not running smoothly, stop the blender and add some liquid or remove some of the solid ingredients from the cup.
How to clean stubborn messes from PRINCESS HOUSE Vida Sana Blender?
For stubborn cleanup of your PRINCESS HOUSE Blender due to ingredients dried inside, fill the cup about 2/3 full with warm soapy water and screw on the Milling Blade. Place the cup assembly on the blender base and power the unit for about 20-30 seconds. A light scrub may loosen the stuck ingredients.
How to remove a stuck blade assembly from PRINCESS HOUSE Vida Sana?
If the blade assembly of your PRINCESS HOUSE Blender is difficult to remove after blending, pressure might have built up inside, creating a vacuum. Ensure the components are dry and use a towel or jar opener to help separate the blade assembly from the cup.
Why is my PRINCESS HOUSE Vida Sana Blender leaking?
If your PRINCESS HOUSE Blender unit is leaking, check the gasket in the blade assembly to ensure it is not twisted and is correctly in place. If the gasket is damaged, you may contact Princess House Customer Service for a replacement.
What to do if coffee pod split at top in PRINCESS HOUSE Coffee Maker?
If a coffee pod splits at the top in your PRINCESS HOUSE Coffee Maker, check to ensure the pod has been pushed securely down and punctured by the needle. Do not reuse a split coffee pod.
Why PRINCESS HOUSE Coffee Maker will not brew?
If your PRINCESS HOUSE Coffee Maker will not brew, ensure there is enough water in the reservoir and that the inserts are properly secured in the brewing chamber.
Precautions regarding damaged cords, wires, or cracked parts for electrical safety.
Rules for safe operation, handling, and use by individuals, especially children.
Guidelines to prevent damage to the blender or surroundings, avoiding misuse.
Identification of key parts like blades, containers, lids, and rings.
Identification of the base unit, power cord, and sipping rings.
Instructions for initial cleaning and preparation before operating the blender.
Steps for placing ingredients, attaching blades, and locking the container to the base.
How to start, stop, and complete blending, then detach and finish.
Guidance on cleaning the base unit, components, and handling gaskets.
Important notes on handling blades and ensuring proper gasket placement for leak-proof seals.
Advice on ingredient order, size, fill levels, and blending duration for best results.
Recommendations for ingredient preparation and operation for milling tasks.
Solutions for problems like the blender not turning on, stopping, leaking, or poor performance.
Nutritional information for incorporating leafy greens and fruits into blends.
Guidance on including seeds, nuts, and liquids for enhanced nutritional content.
Technical details including model, power, dimensions, and cord length.
Information on the one-year warranty, exclusions, and legal rights.
Power| power source | 120VAC – 60 HZ |
|---|---|
| output | 600 Watts |
| power level | 600 Watts (+15% - 15%) |
Weight and Dimensions| weight | 4.87 lbs. |
|---|---|
| dimensions | 10.23 x 13.7 x 6.3 inches |
| cord length | 2.13 ft. |
To Next Page
