6
Table Chef Pro Article 102300/102310
Maintenance
and cleaning
• Never move the appliance whilst it is
switched on or is still hot. Switch off
the appliance, and wait until it has
cooled down before you move it.
• Never immerse the thermostat in
water, or in other liquids. If this
happens do not use the appliance any
more; dispose of the appliance.
• Never use corrosive or scouring
cleaning agents.
After Use (see Fig. 2)
1 Always remove the plug from the wall
socket and allow the appliance to cool
down completely before you clean it.
2 Remove any residues with kitchen
paper towel.
3 Clean the thermostat with a damp cloth.
4 You can clean the appliance in a
dishwasher or hot washing-up water.
Note: never immerse the power cord’s
thermostat plug in water; always use a
damp cloth!
5 Dry the appliance thoroughly after
cleaning.
Make sure that the appliance’s
thermostat socket is completely dry
before you use it again!
6 Store the appliance and power cord in
the box. Save these user’s
instructions.
7 Store this Table Chef Pro in a dry place,
out of the reach of children.
Never pour cold water onto the grill
plate; this will damage the grill plate,
and the water will boil and splash.
Safety
General information
• Please read these instructions
carefully, and retain them for future
reference.
• Use this appliance only in accordance
with the instructions.
• This appliance is intended solely for
domestic use.
• The use of this appliance by children
or persons with a physical, sensory,
mental or motor disability or with a
lack of the necessary knowledge and
experience may cause a hazard.
Persons responsible for the safety of
such people must give explicit
instructions or supervise the use of
the appliance.
• Keep the appliance out of the reach of
children, and of persons who may not
be able to operate it safely.
• The appliance is not intended to be
operated by means of an external
timer or seperate remote control
system.
• Have any repairs carried out solely by
a qualified electrician. Never try to
repair the appliance yourself.
Always use the power cord and
thermostat supplied with this
appliance. Never use a power cord and
thermostat from another appliance.
Heat and electricity
• Verify that the mains voltage is the
same as that indicated on the type
plate on the appliance before use.
• Plug the appliance into an earthed
wall socket.
1080913 - Table Chef Pro Article 102300_10-V1.book Page 6 Wednesday, May 14, 2008 10:25 AM
To Next Page
Loading...
