Need help?Do you have a question about the Princeton Instruments HRS-300 and is the answer not in the manual?
General| Brand | Princeton Instruments |
|---|---|
| Model | HRS-300 |
| Category | Measuring Instruments |
| Language | English |
High accuracy and repeatability of direct-drive wavelength scanning system.
Allows up to nine gratings for optimized system performance and self-alignment.
Improves spectral resolution, intensity, and data consistency by up to 60%.
Push-button wavelength calibration for up to 10x greater accuracy.
PMT: 0.09 nm, CCD: 0.10 nm. Dispersion: 2.38 nm/mm.
Accuracy: +/-0.2 nm, Reproducibility: Within 0.004 nm.
Carefully unpack and examine the HRS-300 and accessories.
Control via USB or RS232 connection for wavelength scanning and grating control.
General procedure for mounting PI SpectraPro accessories to slit assemblies.
Procedure for mounting array detectors (CCDs, etc.) to the HRS-300 using Spec-Mount.
How to adjust slit width using the micrometer knob from 0.010 mm to 3 mm.
System initialization upon power-up to set wavelength, grating, and turret reference.
Control via terminal emulation, USB, or RS232 using command set.
Procedure to align and focus the array detector to the HRS-300 optical system.
USB-powered AE source for wavelength calibration with Hg and Ne-Ar lamps.
To Next Page