MAINTENANCE AND IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these
instructions handy for future reference.
Prinker Korea Inc. makes no representations or warranties regarding any damages, or benefit expected by using this device and its accessories lawfully, or any request from a
third person, which are caused by the inappropriate use of this product.
Keep Prinker S, its accessories, and any small components out of the reach of small children.
Notes for Prinker
• Do not attempt to disassemble the Prinker device.
• Do not drop the Prinker device or allow it to hit solid objects.
• Do not immerse the Prinker device in water. To prevent Prinker device from being damaged by moisture, do not use or store it in very humid environments, such as in rain or
near bodies of water.
• Do not use or store Prinker in dusty places or on a beach to prevent dust or sand from entering in the device, causing possible damage to it.
• Do not use or store Prinker device in a hot environment or under direct sunlight.
• Do not use or store Prinker device near a powerful magnetic field, for example near a magnet or transformer.
• Turn Prinker device o if it overheats and wait until the unit cools down to resume using the device.
• Avoid touching and scratching the print head nozzles and copper-colored electrical contacts.
• When cleaning Prinker device body, do not use inflammable, alcohol-based or organic cleaner. Use only dry cloth to clean nozzles and copper-colored electrical contacts inside
the device.
• Due to environmental conditions, in some high-altitude regions it may be necessary to clean nozzles more often.
• If ink accidentally split inside the device, turn the device o, remove the battery and cartridges, and use wet wipe to clean the copper-colored electrical contacts inside Prinker
device.
• Remove the battery and cartridges when you are not going to use Prinker device for more than 15 days. The device should be turned o before you remove the battery and
cartridges.
• Store Prinker device placed on top of Docking Station, with top cover locked and on a flat surface when storing the device for long periods of time.
• Do not touch the connectors of the Prinker device.
• Do not stand on or put objects on the system, and do not stack the system with other devices.
• Radio waves may aect electronic equipment or medical devices (for example, pacemakers), which may cause malfunctions and possible injuries. If you use a pacemaker or
other medical device, consult your physician or the manufacturer of your medical device before using the wireless networking feature (Bluetooth® and wireless LAN). Do not
use the wireless networking feature in the following locations:
– Areas where wireless network use is prohibited, such as in hospitals. Abide by medical institution regulations when using the system on their premises.
– Areas near fire alarms, automatic doors and other types of automated equipment.
To Next Page
Loading...