Contents
SECTION 1 IMPORTANT SAFETY INFORMATION 3
SECTION 2 IDENTIFYING AND CONNECTING YOUR SYSTEM 6
2.1 Identifying the parts of the ProScan III controller 6
2.2 Connections 7
2.3 Installing accessories and indicators 8
2.31 Installing stages 8
2.32 Installing focus 9
2.33 Installing filter wheels and shutters 11
2.34 Fourth Axis or Auxiliary Axis equipment 12
2.35 Connecting the Interactive Control Centre 12
2.36 Installing a Lumen 200Pro 12
2.4 Expanding the ProScan III 13
SECTION 3 INSTALLING AND USING THE SOFTWARE 18
3.1 Installing software 18
3.2 Using the program 19
SECTION 4 SOFTWARE COMMANDS 41
4.1 ASCII Commands for RS232 or Virtual COM port 41
4.2 General Commands 44
4.3 Stage Commands 47
4.4 Z Axis Commands 51
4.5 Filter Wheel Commands 53
4.6 Shutter Commands 54
4.7 Lumen Pro Commands 55
4.8 Pattern Commands 56
4.9 Stage Mapping Commands 58
4.10 OEM Commands 59
4.11 Error Codes and Error Tracking Commands 60
4.12 CS152 (Joystick Backwards Compatibility) 61
4.13 Examples for the CS152 Joystick buttons 63
4.14 Add on trigger board commands 64
4.15 Encoders 65
4.16 TTL input/output symbols 68
4.17 TTL Command Set 69
4.18 TTL Programming Advanced Features 70
To Next Page
Loading...
