DANGER – Never alter the AC cord or plug. The power cord set must be
an appropriately rated and approved cord set in accordance in the
regulations of the country it is used in. If the supplied plug adapter is not
the correct fitting for your geographic area or if you are unsure about the
relevant regulations, please contact your supplier for advice
The ProScan III is class 1 and must be only connected to a power outlet which
provides a protective earth (ground).
Do not attempt to disassemble the product. Doing so will void the warranty. This
product does not contain consumer serviceable components. Servicing should only be
performed by Prior or a Prior approved agent.
Only the exterior of this product should be cleaned using a damp lint-free cloth.
This warning symbol indicates that there is a high voltage danger.
This warning symbol indicates that there is a strong magnetic field
This sign indicates that there is a risk of damage or injury if instructions
are not followed correctly.
In accordance with The Waste Electrical and
Electronic Equipment Regulations, this symbol
indicates that the product must not be disposed of
as unsorted municipal waste but should be
collected separately.
Refer to your local authority in the EU for return
and/or collection systems available in your country.
To Next Page
Loading...