Troubleshooting tablePage EN-34
Problem Possible cause Solutions, tips
The dish does not get
sufficiently hot.
The power or time is set too
low.
Heat the dish for a little more time in
the appliance.
The dish was very cold
when being placed inside.
Container is unsuitable if
it becomes hotter than the
dish.
Use a suitable container.
The appliance emits
odours.
This happens the first time
the appliance is used.
No error. Odours will dissipate during
operation.
The cooking chamber
door (1) or viewing
panel (2) fogs up.
The dish releases moisture.
No error. Simply wipe away any
moisture after operation.