What to do if the Prizma SALT FX Pro Medical Equipment display does not light up?
If the display of your Prizma Medical Equipment does not light up, ensure the device is correctly plugged into the socket. Then, turn on the power switch to the "1" position. If it still doesn't work, replace the fuses.
What to do if Prizma SALT FX Pro does not produce aerosol?
If your Prizma Medical Equipment isn't producing aerosol, make sure you pour salt into the salt tank. Check that the dispenser power plug, fan power plug, and grinder power plug are all properly connected. Also, clean the dispenser and grinder, and ensure the halogenerator doors are closed and locked.
What to do if the Prizma SALT FX Pro display shows alarm 'Grinder is blocked'?
If your Prizma Medical Equipment displays the alarm "Grinder is blocked", inspect the salt silts around and beneath the rotating part of the grinder. Use a small brush to carefully remove salt from the grinder and any salt deposits collected beneath it.
What to do if the Prizma SALT FX Pro display shows alarm 'Dispenser is blocked'?
If the display of your Prizma Medical Equipment shows the alarm "Dispenser is blocked", use a small brush to carefully remove salt from the dispenser.
What to do if the Prizma SALT FX Pro display shows alarm 'Dispenser fuse is blown'?
If your Prizma Medical Equipment displays the alarm "Dispenser fuse is blown" because the dispenser fuse has blown, replace the fuse.
What to do if the Prizma SALT FX Pro display shows alarm 'Grinder fuse is blown'?
If your Prizma Medical Equipment displays the alarm "Grinder fuse is blown" because the grinder fuse has blown, replace the fuse.
Key safety precautions for using electrical appliances.
General usage guidelines and precautions for the halogenerator.
Important checks before using the device.
Steps to take immediately if an error occurs with the device.
Overview of the key functionalities and characteristics of the halogenerator.
Explanation of how the halogenerator creates salt aerosol.
Identification and labeling of the different components of the halogenerator.
Essential guidelines for safely grounding the halogenerator to prevent electric shock.
Guidance on optimal placement of the halogenerator for effective salt room operation.
Visual examples illustrating different installation configurations for the halogenerator.
Details on how salt consumption varies with program settings.
Explanation of the various icons used on the device's display screen.
General recommendations for maintaining the halogenerator's condition.
Instructions for safely storing the device when not in use for extended periods.
Guidelines for environmentally responsible disposal of the electronic equipment.
Explanation of important safety and warning symbols used in the manual.
Detailed technical specifications of the PRIZMA Dry Salt Aerosol Generator.
Detailed measurement description of salt consumption.
General| Category | Medical Equipment |
|---|---|
| Model | SALT FX Pro |
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Temperature | 10°C to 40°C |
| Operating Humidity | 30% RH |
| Control | Digital |
| Timer | 1 minutes |
| Certification | CE |
To Next Page