Pro Antennas Dual Beam Pro - User Manual

Dual Beam Pro
Rotatable
Multi-Band
HF Antenna
Pro Antennas © 2021
Assembly Instructions
Dual Beam Pro
Assembly Instructions
Thank you for purchasing this unique antenna product. We
hope that it will provide you with many hours of operation and
pleasure for years to come.!
Please take a little time to carefully follow the instructions and
study the pictures to help understand the correct positioning
and alignment of the various components.!
Contents
The packing tube should contain:!
2 x 1 inch diameter alloy 2.5m main element sections!
complete with end caps and capacity hat securing bolts!
2 x 3/8 inch diameter alloy 2.5m capacity hat elements!
1 x GRP rod centre support insulator!
The small box should contain:!
1 x matching transformer with mounting block!
2 x cable ties!
2 x matching transformer connection leads!
1 x galvanised mast head support clamp!
4 x 35mm M6 bolts with serrated nuts!
4 x capacity hat element end caps!
1 x self amalgamating tape for sealing the cable connector!
Tools required
10mm and 13mm spanners!
Safety
GRP/aluminium splinters can cause skin irritation and
protective gloves must be worn before handling.!
Ensure you have a safe working area of at least 5m x 3m.!
Abide by the Work at Height Regulations for installation.
1

Summary

Dual Beam Pro Assembly Instructions

Contents

Lists all components included in the packing tube and small box.

Tools Required

Specifies the necessary tools for assembly.

Safety Precautions

Outlines safety measures for handling and installation.

Specifications

Assembly Steps

Mast Head Clamp Attachment

Attaching the GRP rod through the mast head support clamp.

Main Element Attachment

Fitting main elements onto the GRP rod and securing with bolts.

Transformer Connection

Connecting the matching transformer to the antenna assembly.

Capacity Hat Installation

Sliding and securing capacity hat elements onto main elements.

Alignment

Connection and Sealing

Coaxial Cable Connection

Fitting the coaxial cable to the matching transformer and sealing.

Cable Management

Securing the coaxial cable to the support mast with ties.

Installation

Antenna Mounting

Lifting the antenna onto the mast and tightening clamp bolts.

Final Alignment and Checks

Final Alignment

Aligning the antenna for maximum coverage before final tightening.

Final Tightening

Ensuring all bolts, nuts, and cable ties are securely tightened.

Pro Antennas Dual Beam Pro Specifications

General

Brand	Pro Antennas
Model	Dual Beam Pro
Category	Antenna
Language	English